Steelman 1/4 in. Angle Die Grinder
$51.32
The Steelman 1520 1/4 in. 90° Angle Pneumatic Die Grinder combines hardened spiral bevel gears with ball bearing construction to produce a smooth operating and easy to use hand held power tool. It features a powerful 0.5 HP motor that peaks with a 22,000 RPM free run speed and is controlled with a safety locking tease-trigger for precision control as well as protection from accidental startups. The 1-piece body shell design simplifies maintenance by eliminating leak points and connections that can cause leaks over time. The 1/4 in. collet is set at a 90° angle to the body and is designed to accept a wide range of heads and bits to help you get the job done right with quick-swappable convenience. Highly efficient, the motor runs on a mere 4 cu. ft. of compressed air at 90 psi. The air inlet on the tool’s base is threaded to accept a conventional 1/4 in. NPT fitting or quick disconnect coupler. Tool measures 6.5 in. L and weights 1.5 lbs. letting it get into tight spaces when needed all while not tiring out operators like heavier designs.
In stock
Description
Description
The Steelman 1520 1/4 in. 90° Angle Pneumatic Die Grinder combines hardened spiral bevel gears with ball bearing construction to produce a smooth operating and easy to use hand held power tool. It features a powerful 0.5 HP motor that peaks with a 22,000 RPM free run speed and is controlled with a safety locking tease-trigger for precision control as well as protection from accidental startups. The 1-piece body shell design simplifies maintenance by eliminating leak points and connections that can cause leaks over time. The 1/4 in. collet is set at a 90° angle to the body and is designed to accept a wide range of heads and bits to help you get the job done right with quick-swappable convenience. Highly efficient, the motor runs on a mere 4 cu. ft. of compressed air at 90 psi. The air inlet on the tool’s base is threaded to accept a conventional 1/4 in. NPT fitting or quick disconnect coupler. Tool measures 6.5 in. L and weights 1.5 lbs. letting it get into tight spaces when needed all while not tiring out operators like heavier designs.
Highlights
- Ideal grinding tool – ideal tool for when you need to remove rust and finishing steel and non-metal surfaces
- Safety trigger lock secures against accidental startup without impairing easy use
- 1/4 in. collet 1/4 in. collet accepts a wide range of heads for a variety of uses
- Free speed – free running speed maximum is 22,000 RPM
- Variable speed throttle for positive speed control via lever style tease trigger
- Reduced maintenance- single piece body shell design minimizes wear points and simplifies maintenance
- Low air demand- operates on a mere 4 cu. ft. per minute of 90 psi compressed air
Specifications
Details
- Air Tool Type: Grinder
- Air consumption at recommended operating pressure (CFM): 4
- Grinder type: Angle
- Hose Included: No
- Housing Material: Metal
- Included: No additional components or accessories are included
- Maximum grinding speed (rpm): 22000
- Project Type: Surface Prep
- Recommended operating pressure (psi): 90
- Support: 90-Day
- Tool Weight (lb.): 1.5 lb
- Tools Included: No Additional Tools Included
- Tools Product Type: Air Tool
Warranty / Certifications
- Manufacturer Warranty: 1 Year Limited Warranty
Dimensions
- Air Inlet Size (in.): 1/4 in
- Product Depth (in.): 6.0 in
- Product Height (in.): 1.25 in
- Product Length (in.): 6.0 in
- Product Width (in.): 3.12 in
- Wheel Width (in.): 0.25 in
Specifications
| Brand | Steelman |
|---|---|
| Model | 1520 |
| UPC | 099198015200 |
| Material | Metal |
| Product Width | 3.12 in |
| Product Height | 1.25 in |
| Product Length | 6.0 in |