Kidde 10-Year Worry Free Smoke & Carbon Monoxide Detector, Lithium Battery Powered with Photoelectric Sensor and Voice Alarm

Description

Description

The Kidde P3010CU is a 10-year, sealed battery, smoke and carbon monoxide alarm with a voice warning system that features photoelectric and electrochemical sensing technology with Smart Hush feature. This combination alarm combines the detection capabilities of a photoelectric sensor with that of an electrochemical sensor, which is used to detect CO. When either sensor notices a potential hazard, it will communicate with the other. Depending on what is detected, the alarm will adjust its smoke sensitivity in order to better discriminate between a real hazard and a false one. This constant communication enhances the alarm’s overall performance and significantly reduces the potential for a nuisance alarm.

Highlights

• This alarm meets 10 year legislation laws; check local building and safety ordinances for compliance
• Lithium battery never needs replacement – simply recycle the smoke detector
• Protection during power outages and no low battery chirps
• Smart HushTM – Temporarily silences nuisance alarms for approximately 9 minutes and will not allow hush mode unless the unit is in alarm mode.
• Voice warning alerts of “Fire!” when a smoke or fire hazard is present, “Warning! Carbon monoxide!” when gas is detected, or “Low battery”
• Sealed-In Lithium Battery – Sealed-in lithium power supply; no battery replacement required over the 10 year life of the alarm. Eliminates worry about battery removal or unauthorized deactivation of alarm.
• End of Life Hush – End of life indication can be silenced three days at a time up to 30 days to allow for alarm replacement at a more convenient time
• Photoelectric Sensor – Smoke alarm contains advanced photoelectric sensor that may detect visible particles (associated with smoldering fires) sooner than ionization alarms
• Self Activation – Alarm automatically activates when attached to the mounting bracket
• Combination Smoke and Carbon Monoxide Alarm – Smoke and CO sensing technologies work together to detect real fires faster and reduce nuisance alarms.
• Blinking LED lights indicate when: alarm is in operation, was initiated, or is in hush mode
• Replacement Chirp – alerts to replace alarm after 10 years of operation
• Ensure whole home family protection by placing 1 fire detector and carbon monoxide detector on each level of your home, in your bedroom, & other locations where required by law
• Industry experts (such as the NFPA), recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home.
• End of life hush end of life indication can be silenced 3 days at a time up to 30 days to allow for alarm replacement at a more convenient time
• Smoke and carbon monoxide detector utilizes a photoelectric sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
• *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.
• UL/CSFM reference model P3010CU

Specifications

Details

• Alarm Sensor Type: Photoelectric
• Alarm/Detector Features: 10-Year Battery,Hush Button,Tamper Resistant
• Alert Type: Voice
• Battery Type Required: Built-In
• Commercial/Residential: Home
• Connector/Contact Type: None
• Fixed or portable: Fixed
• Included: Batteries
• Pack Size: 1
• Power Source: Battery
• Support: 90-Day
• Voltage (V): 4.5

Warranty / Certifications

• Certifications and Listings: UL Listed

Dimensions

• Product Depth (in.): 1.6 in
• Product Height (in.): 5.22 in
• Product Width (in.): 5.22 in