FIMCO MANUFACTURING INC. 1-1/4 in. Standard 4 Outlet Indexing Valve with 2, 3 Zone Cams

Description

Description

The 1-1/4 in. Standard 4 Outlet Indexing Valves offers a reliable and economical way to automate multiple zoned irrigation systems. This Hydro Indexing Valve has an inlet that is made to accept 1 1/2″ in PVC pipe. It then has 4 outlets that are made to fit 1¼ PVC pipe. The simple design of the indexing valve ensures easy installation and maintenance.

Highlights

• Valve is recommended for use in a pump driven irrigation systems
• Valve can run from 2 to 4 zones based on the chosen cam configuration
• Valve can operate at 10 to 50 GPM with the standard stem and disc assembly (included) and can operate at pressures as low as 6 PSI with the low flow stem and disc assembly (not included)
• 1-year manufacturer’s warranty
• 1 1/2 in. inlet
• 1 1/4 in. outlet
• Comes installed with a 4 zone cam
• 2 and 3 zone cams included
• Great alternative to individual solenoid valves
• 1 valve can replace up to 4 1 1/2 in. solenoid valves
• 1 above ground FIMCO valve controls all zones eliminating the need to dig into the ground to locate electric solenoid valve boxes
• Valve works either manually or fully automatic with a controller (not included) to turn on and off the water supply (pump or solenoid)
• Only use standard clear PVC cement (not included) for installation of the valve and allow 2 hours to set before subjecting it to internal water pressure, do not use fast setting blue glue as it will rapidly deteriorate the ABS plastic used in the construction of the indexing valve, purple primer has a similar effect and should only be applied to PVC pipe and not the valve housing
• Please remember that pipe size is measured by inside diameter. This valve is meant to accept 1 1/2″ pipe on the inlet and 1 1/4″ pipe on the outlets. The outlets and inlet will be larger than the pipe size it receives. If you need help identifying which size indexing valve you require please visit this page: https://www.fimcomfg.com/identify-indexing-valve/
• This valve has the standard sized valve body. It has 8 screws around the perimeter.

Specifications

Details

• Compatible Pipe Material: PVC
• Connection: Slip-Joint
• Installation: Above Ground
• Irrigation System Component: Valve
• Material: Acrylonitrile Butadiene Styrene (ABS)
• Maximum Pressure (PSI): 80
• Maximum Working Temperature (F): 130
• Number of Outlets: 4
• Operation: Automatic,Manual
• Pack Size: 1
• Package Quantity: 1
• Pressure Rating: 10 psi Min
• Product Weight (lb.): 3 lb
• Support: 90-Day
• Thread Type: none
• Valve Type: Indexing

Warranty / Certifications

• Manufacturer Warranty: 1 year replacement

Dimensions

• Inlet Size (in.): 1.9
• Outlet Size (in.): 2 or less
• Product Height (in.): 7.5 in
• Product Length (in.): 6.5 in
• Product Width (in.): 6.5 in